Safe method of “fixing off” wall frames

Easy “walk in to” design

Can be used as a finishing / bracing table

Presents the frames at a safe, easy work height

In built safety features to prevent unexpected movement in cases of air removal or component failure

Minimises operator bending and reaching

TILT TABLE

The Pryda Tilt Table has been developed to remove the continual bending and reaching required
when fitting off noggins and finishing prefabricated wall frames.

The table allows wall frames to be easily moved across it to the required position for finishing.
Once there, the bench rotates to an angle that allows the operator to safely and easily finish the
frame without undue bending.

This system’s easy, simple controls ensures that untrained or inexperienced operators will require
minimal or no training in its use. Installation can be finished in approximately one to two hours.

SPECIFICATIONS

Dimensions
Overall dimensions (std unit)– Length6070mm
– Width (when fully opened)2900mm
Maximum wall frame length6m
Work height (not tilted)920mm
Tilt angleVariable to 45 degrees
Base rail height (when fully tilted)100mm
Weight (approx)350kg
Installation requirements
PowerNil
Air5cfm @ 100psi
DataNil
FoundationLevel, sound concrete floor in both directions

DOWNLOAD BROCHURE

RELATED PRODUCTS

  • Pryda Production Viewer
  • Manual outfeed
  • Automated outfeed